
Nano wood protection
TCM NANO WOOD is a product of nano -technology — an intelligent anti-stick-coating.
It coats every single fiber with an invisible , UV-stable , naturally -breathing , protective layer. Appearance, touch and color be affected.
The fiber will be protected from water, soiling and stains in the widest possible sense. The effect of this protection is that dry dirt cannot stick onto the fiber.
Moist dirt will no longer be absorbed by the fiber. Water , or other liquids , will simply pearl off the treated surface.
TCM Nano Wood can be applied to all natural timber fibers, such as: bamboo, coconut, rattan and wood.
Always pre-test surface to be treated in an inconspicuous area before proceeding.
TCM Nano Wood has a particularly good adhesion only on detergent-free, residue -free surfaces. Therefore, it is indispensable to clean the fibers/surfaces to be treated thoroughly before starting. The last rinsing must be with clear water only. TCM Uni Ph 7 cleaner harmonizes optimal effect with TCM Nano Wood. Spray TCM Nano Wood onto the pre-cleaned fibers with the finest possible sprayer at a distance of 15 centimeters.
Product Useage : approx. 20-30 ml/m˛. We recommend at least two applications of TCM Nano Wood, to achieve maximum protection. Work on a wet basis. Complete protection after 24 hours at the earliest. If conditions are unfavorable (for example : if too much of the product is applied, low temperatures, high humidity, etc., the protection will be delayed ). Therefore, load tests such as wash and cleanings, should be effected at the earliest 3-4 days after application.
* In case wood surfaces are severely soiled, TCM Nano Wood should be applied in a separate operation because sometimes dirt , which has not been completely removed , re-appears on the surface. However, if the impregnation has already been made, the dirt will be covered and encapsulated.
|