| 
 Transparent - one  component coating including Ultra Violet absorber
 TCM Asia-Teak deck UV +  protects materials and surfaces, to which it is applied, against soaking with  water – at the same time this surface remains actively able to breathe – and  therefore thus prevents the treated surface from absorbing water, from rotting  and also against expansion and distortion.  It gives a deep  protection to the surface against water and moisture, even if the water does not  run off any more. The pearling-off effect can easily be regained by simply  retreating the surface(An application every three monts iis  advisable under Thailands harsh UV properties).
 
 Properties: 
                · No oils, no conventional paint – this means that the treated  surface remains optically unchanged· Nano  particles enclose the fibers of materials and surfaces and protect the wood and  it remains:
 ->Actively able to breathe
 ->Has a deep protection against water/moisture absorption
 ->Water and Oils “pearl-off” the materials and  surfaces, and cannot seep into the wood
 · Gives  protection against mosses
 · Is  resistant against the effects of seawater/saltwater and against sea/salt air, and  acid rain
 · Provides  stability against the effects of Ultra Violet light and rays
 · Is  free of silicones, wax and oils
 · High  productivity / Highly effective, owing to the extremely thin coating:
 
 With only one liter a surface of up to 20 m² may be  treated
 
 Other Areas of  Application: · The  impregnation of all untreated, and also oiled and waxed wood surfaces is  possible· Protection  of valuable garden furniture, sheds, window frames, and even terraces
 · The  impregnation of synthetic and natural fiber materials such as those of sun  blinds,
 sunshades and umbrellas, the hoods of  convertible automobiles, etc…
 · A  protection against the effects of mosses and also against dirt when applied to  roof tiles,
 the  tiling on terraces, on paving stones, etc...
 · Furthermore  this product may be used on concrete, concrete bricks and tiles, natural stone,
 paving,  glass, plastered surfaces, ceramic products, tiled areas which have been  grouted, on
 fibrocement,  etc…
 
 Applying the Coating:The application of this protective coating is “child’s-play” – it can be  achieved by painting, rolling, or by spraying. Because there is no optical change  to the materials/surfaces coated, there is no need for bordering surfaces to be  masked (i.e. rubber sealing etc.). When applied to very light colored woods it  is possible that a very slight “honey-tone” may be the result. There is no  “running or dripping” when working with this product – excess coating will  merely “pearl-off” and dissipate into the atmosphere. The surface to be coated  must be completely dry and clean before application of the coating. The maximum  humidity of wood may not be above 18%. Before use the coating should be well  shaken. Do not return the coating to the original container once an amount has  been taken out and used! All containers and utensils which have been used for  work should be thoroughly cleaned and washed in water. At a temperature of 15  to 20 degrees Centigrade the coating is dust-dry after about 1 to 2 hours – and  after about 4 hours is water resistant and also has achieved the “pearling-off”  properties. 
 | 
          
            | Uses of the Coating  Indoors: This coating may be  safely used indoors without any damageto health, persons or  animals. Especially after the drying time,
 with correct use and  application, the treated surfaces coated with
 TCM Asia-Teak deck  protective emit no dangerous fumes or
 gases which could be of  danger to persons or animals – or to
 the health of these.
 |  |