.gif)
Kristal Bond 100% UV
window protection coating
|
|
Speedheater IR
Paint removing tool
|
|
Shower&Ceramic Protection
|
|
Stainless Steel Protector
|
|
Nano Textile Stain Protector
|
|
Scaffold Free Glass Cleaning
|
|
|
 |
Nano Textil Protection
TCM NANO TEXTILE is a product of Nanotechnology
an intelligent dirt reflecting solution
|
It coats every single fiber with an invisible, UV-stable, naturally-breathing, protective layer. Appearance, touch and color will not, by any means, be affected. The fiber will be protected from water, soiling and stains in the widest possible sense.
|
|
The effect of this protection is that dry dirt cannot stick onto the fiber.
Moist dirt will no longer be absorbed by the fiber. Water, coffee, red
wine, gravy, etc. will simply pearl off the treated fibers. TCM Nano
Textile can be applied to all synthetic and natural fibers from the finest
silk to absorbent cotton (for example: suits, ties, carpets, raincoats,
textile surfaces, coconut fibers, jute, sisal, mattresses, curtains, child’s
seats, upholstery, convertible tops, blinds, lamellas, umbrella fabrics,
motorcycle clothes, Alcantara and suede).
|
TCM Nano Textile has a particularly good Adhesion only on detergent-free, residue-free surfaces. Therefore it is indispensable to clean the fibers/surfaces to be treated, thoroughly, before starting. For clothing items, the last rinsing must be with clear water only. Textile surfaces, such as carpet floors, upholstery, umbrella fabrics, etc. must be pre-cleaned with a detergent-free carpet and upholstery cleaner. |
This cleaning chemistry harmonizes optimal effect with TCM Nano Textile. Spray TCM Nano Textile, onto the pre-cleaned fibers with the finest possible sprayer, at a distance of 15 centimeters. If necessary, textiles can be put back into shape with a warm iron. Product Usage: approx. 20-30 ml/m² for fabrics; textile surfaces approx. 10 ml/m² for every mm thickness of the pile. We recommend at least two applications of TCM Nano Textile to achieve maximum protection. Work on a wet basis. Complete protection after 24 hours at the earliest. If conditions are unfavorable, (for example: if too much of the product is applied, low temperatures, high humidity, etc.) protection will be delayed. Therefore, load tests such as wash and cleanings, should be effected, at the earliest, 3-4 days after application |
|
|
If you have activated pop up blockers press SHIFT+Click to open below sides. |
Download product catalog |
|
|