mailto office@tcm-asia.com     office phone +66 (0)76 - 249505     direct call: +66 (0)86 - 9439834

TCM Stone eXtreme Protector One time treatment – lifetime protection
Concrete Materials	Stone materials
Concrete, Mortar, Pavement, Floors	Sandstone , Sand Wash, Travertine, Limestone, Brick, Gypsum, Natural Stone
usage	usage
Refinement and preservation of concrete
The most important features
Single application Penetration depth 10 – 30 mm Cured after 28 days; pedestrian traffic permitted after 30 minutes May be used as a membrane hardener (fresh concrete) Cured after 34 days Pressure resistant to 5 bar	Seals all types of natural stones Increased pressure- and friction- resistance Prevents ingress of moisture yet retains the ability to diffuse water vapor Water cannot penetrate deeper than 0,2 mm and cannot flow into the material.
Application
Seals all vertical and horizontal alkaline building materials. May be applied to moist and clean dry surfaces.
Areas of application
May be used as a replacement for bitumen or fibrous sealant for new constructions and renovation. Used for cellars, flat roofs, parking garages, balconies, terraces, concrete, joint less floors, mortar and plaster. Used on limestone, porous concrete, marble, granite, gypsum. Used on new constructions, interior walls (gypsum) and repairs.
Special Features	Special Features
Penetrates to a depth of 10-30mm and increased pressure resistance to at least 5 bar May be used as horizontal barrier	Penetrates to a depth of 5-30 mm and increase pressure resistance
General features
Allows diffusion of water vapor Covers cracks up to 0,2 mm Non flammable Provides a strong even protective layer on the surface Acid resistant to pH2,5 Wear and tear is greatly reduced Unlimited effect
Properties	Properties
Fluid Neutral color Rainproof after 5 hours Permits pedestrian traffic after 30 minutes Completely cured after 28 days May be coated after 48 hours with a water- soluble, porous material. Other coatings after curing	Fluid Neutral color Rainproof after 1 hour Permits pedestrian traffic after 30 minutes Completely cured after 28 days May be coated after 48 hours with a water- soluble, porous material. Other coatings after curing
Consumption
0,1 - 0,3 litre per m2 dependent on material foundation	80 ml up to 300 ml per m2 dependent on material porosity and penetration depth

mailto office@tcm-asia.com     office phone +66 (0)76 - 249505    direct call: +66 (0)86 - 9439834