mailto office@tcm-asia.com     office phone +66 (0)76 - 278038     direct call: +66 (0)86 - 9439834

Nano Ceramic 2k coating

The coating material on the basis of the Sol Gel Nanotechnology produces a very good behavior to run off of water and makes easier the removal of dirt and lime about approx. 90%. That is less cleaning intervals and less cleaning means consumption.
Transparencies 2 component coating Water, oil, dirt and lime-unfriendly coating being based on the sol gel Nanotechnology. The ceramic sealing protects carrier materials against soiling, it allows to reject water and oil and lime cannot retreat so easily. It pores-deeply protects against dirty admission, even if the water in the surface no more bubble off. The bubble from - effect can be recovered by reworking the surface (every two years outside recommended and every 5 years inside recommended).
Yesterday this was: Lime edges and dirty edges in sink and WC, on shower partitions and tiles, strong germ education and bacterium increase in the kitchen and in the bath, marble grounds with wine stains, branded Spots and bold splash on hearthstones and in the stove.
Today this is: The pore surface of the properties is sealed antistatic and waterproof, so that by far less soiling on the properties can stick. The result is up to 90 % savings in cleaning agents and expenses. Different famous manufacturers already use this technology.
Properties: No oil, no varnish, no visible change in the treated material. Nanoparticles seal the surface with a glassy shift:
Water and oil-unfriendly shift Pores-deep protection from dirty admission Preventive protection against bacteria, algae and moss infestation resistant against lake water and salty air, resistant against acid rain UV solidly Silicone freely, freely of wax and freely of oil If its effect keeps without wear more than 2 years High productivity by very low shift thickness: Longer life cycle of the treated properties
Application areas: If this delays get dirty from all glass and ceramic surfaces (e.g., sink, shower partitions). By the sealing the surfaces with 90% let themselves keep clean less cleaning strength and cleaning agent. Seal from shower partitions to ceramic products like sink, tiles, WCs, bathtubs.
Processing: Applying by pranks, rolls or spraying. Because no optical change in the carrier material originates, connection surfaces (e.g., elastic sealing) do not need to be covered. The surface must be dry before the application and be clean. That is no fat or Tenside (soap remains). Before the application well pour on. No filling back into stock vessels. Application machines and vessels with water clean. Dries with 15 - 20°C after approx. 1 - 2 hours, and receives hydro-and oleophobe effect to bubble off already after 4 hours
Inside areas: Can be used in buildings safely for the health of people and animals. In particular after transaction of the drying time which is reached by proper application after approx. 4 hours, no toxic steams which could influence the health of person and animal, go out from with glass and ceramic sealing to sealed surfaces.